EXPLORE MORE CATEGORIES
- Home
- ยป
- Products & Services
- »
- ELECRICAL TESTING
ELECRICAL TESTING
Industrial Maintenance
Megger Easyloc RX Utility Location System
Product Price: Rs 1.65 Lakh / UnitGet Best Price
Product Brochure
Product Details:
| Brand | Megger |
| Model Name/Number | Easyloc-RX |
| Weight | 2.5 kg |
| Dimensions | 10 x 67 x 26cm |
| Operating Time | 40 hours |
| Storage Temperature Range | -40 Degree Celsius + 70 Degree Celsius |
| Operating Temperature Range | -20 Degree Celsius + 55 Degree Celsius |
| Protection Class | IP67 |
- The Easyloc is fast and simple to operate, with features designed to avoid potentially dangerous power cables and other services as efficiently as possible. The Easyloc receiver shows the signal level received and marks the maximum with a marker. This means operators work with both an audio signal and visual confirmation at all times. Depth measurement is possible at the push of a button, even when using the power mode, but only with Easyloc Standard. Easyloc is suitable for water, rail, gas, power, highways and telecommunication utilities, as well as contractors, groundworks, building, local authorities, civil engineering, street lighting and fencing, gardening and landscaping companies.
- Utility location system to detect and trace cable runs and pipe networks. The Easyloc is fast and simple to operate, with features designed to avoid potentially dangerous power cables and other services as efficiently as possible.
- Easyloc is suitable for water, rail, gas, power, highways and telecommunication utilities and contractors and anyone who is proposing to engage in groundworks.
Advantages Easyloc:
- Avoid cable damage and minimise costly accidents and inconvenient delays
- Quick and simple to operate
- Transmitter with mains voltage-proof output – no separating filter necessary
- Depth measurement at the push of a button, even without a transmitter
Product Overview:
- Make optimum preparations for your building work, quickly and reliably
- Avoid cable damage and help to minimise costly accidents and inconvenient delays
- Depth measurement at the push of a button, even without a transmitter
- 33 kHz – compatible with other location systems
- Large display with automatic backlight
- Quick and simple to operate
Get Best QuoteRequest A Callback
Megger DET14C Digital Earth Clamp
Product Price: Rs 1.45 Lakh / UnitGet Best Price
Product Brochure
Product Details:
| Model Name/Number | DET14C |
| Brand | Megger |
| Length | 248 mm |
| Weight | 985 g |
| Display Type | LCD |
| Height | 49 mm |
| Battery Type | AA Battery |
| Max Operating Temperature | 50 Degree C |
| Width | 114 mm |
| Battery Life | 24 Hours |
- The DET14C and DET24C represent a new generation of earth/ ground clamp-on resistance testers. These instruments induce a test current into earth systems and measure ground resistance in multi ground installations without needing to disconnect the ground. They offer market leading access, advanced features, simple operation and CAT IV 600 V safety protection. Designed with flat core ends they prevent dirt build up, ensuring measurement integrity and improved reliability over products with interlocking teeth. Other enhancements over current generation products include improved accuracy and up to 300% increase in battery life. In electrically noisy environments the built-in filter function offers increased noise immunity. DET14C and DET24C also offer a true RMS AC current measurement facility up to 35 Amps. The instrument’s ability to measure current flowing in an earth cable is a useful safety feature, especially if the earth cable has to be disconnected. A high current flow to earth could draw an arc on dis-connection with potentially severe consequences. The elliptical shaped head design offers improved access to cables and earth straps in space constrained locations. The clamp head accommodates up to 37 mm diameter cable and 50 mm earth tapes making them suitable for use in power stations, substations, towers and many more facilities. Operation in dark and restricted areas is facilitated by a display with backlight and an audible tone associated with the hold key. Optimised jaw opening mechanism ensures proper jaw closure without excessive use of force when opening the jaws. The DET14C offers storage of results for later on-screen recall and the DET24C supports a download of results via Bluetooth® into PowerDB and PowerDB Lite, Megger’s acceptance and maintenance test data management software. Stored data is indexed using a sequential serial number together with a time and date stamp for each record.
This clamp-on stake-less ground tester can also:
- Balance elements of a ground to mitigate noise
- Balance ground circuits
- Measure continuity of ground circuits in headends and hubs
The elliptical shaped head design offers improved access to cables and earth straps in space constrained locations. The clamp head accommodates up to 37 mm diameter cable and 50 mm earth tapes making them suitable for use in power stations, substations, towers and many more facilities.
Product Overview:
- Elliptical clamp shape improves access to earth cables and straps up to 50 mm
- Low maintenance flat jaw interface
- Measures ground resistance from 0.05 Ω to 1500 Ω
- Measures true RMS ground leakage current from 0.5 mA rms to 35 A rms
- CAT IV 600 V safety rating
- Backlit LCD display
Application:
- The earth resistance clamp meters are particularly suitable for measuring earth resistance in various installations such as buildings, pylons and RF transmitter sites without system disconnection. In addition, they can be used for the inspection and verification of lightning protection systems and virtually any installation where a current loop can be generated.
Features & Benefits:
- Auto-current measurement safety feature n Memory to record and view results n Automatic self calibration n Auto ranging n High and low alarms n Real time clock for date and time stamping of results
Get Best QuoteRequest A Callback
Megger DCM340 Digital Clamp Meter
Product Price: Rs 22,000 / UnitGet Best Price
Product Brochure
Product Details:
| Model Name/Number | DCM340 |
| Battery | 1 x 9V PP3 MN1604 6LR61 alkaline cell |
| DC Current - Sensing Range | 60.0 A |
| AC Current - Sensing Range | 60.0 A |
| DC Voltage | 400 - 600 V |
| Brand | Megger |
| Digit Display | LCD |
| Weight | 225 g |
| Data Hold | Yes |
| Battery Life | 200 Hours |
| Overload Protection | 600 V & 600 A |
| Drop Protection | 1.2 m |
| Operating Temperature Range | 0 Degree Celsius to 30 Degree Celsius |
| Sampling Time | 10 ms |
| Storage Temperature Range | -20 Degree Celsius to 60 Degree Celsius |
| Sensitivity | 3 A |
| Maximum Altitude | 2000 m |
| Auto Power Down | 30 minutes after power-on |
| Positional Error | +-1% of reading |
- The DCM340 is a highly versatile instrument and ideal for use in the installation, maintenance, monitoring or checking of a.c. or d.c. electrical systems and equipment. There are four instruments in the DCM series of clampmeters, including the 400 A a.c. current-only DCM310; the DCM320 which includes voltage and resistance measurement; the DCM330 Fork-Multimeter, which is an open fixed jaw design; and this, the DCM340. Capable of measuring a.c. and d.c. current up to 600 A; a.c. and d.c. voltage up to 600 V; resistance up to 400 Ω; and frequency up to 400 Hz, the DCM340 is the most versatile in the range. Current measurement combined with the comprehensive and accurate multimeter functions of the DCM340 eliminate the need to carry around both a clampmeter and multimeter - this instrument does it all. The large clear digits of the numeric display are complemented by the high-resolution digital bar graph, useful for indicating trending and fluctuation of measurement. The backlight assists use in poorly lit areas such as distribution cupboards and corners of switchrooms; and the data-hold feature enables use on difficult access cables where otherwise the display may be impossible to see. Min/Max hold provides the ability to store the maximum and minimum d.c. or rms values over a period of time. While storage is taking place, either the present, maximum or mini-mum value can be displayed. Peak hold stores the maximum and minimum peak value of an a.c. signal at a 10 ms sample rate. The auto-off feature automatically places the meter in power-save mode after 30 minutes from power-on, but this can be disabled if required for min/max measurements. Using the Relative mode (REL), a stable value can be stored, the instrument zeroed at that point, and then any variation from that value is displayed as a direct measurement relative to it. The DCM340 is safety rated to IEC 61010-1 Cat III 600 V, and is drop-tested to 1.2 m onto a hard floor. It is supplied with test leads and a carry case, and a full 1-year manufacturer’s warranty.
Application:
- The DCM340 is designed to be used on electrical systems and equipment where there is a need to measure current, volts, resistance and frequency. It is therefore intended for use while installing, maintaining, fault-finding or monitoring those systems. The min/max and peak-hold enable maximum load currents from equipment to be identified such as start-up currents to motors and heaters. With the added benefit of d.c. current measurement, it can also be used in applications including domestic power generation from solar panels and wind-turbines; battery monitoring; automotive uses for charging and load circuits; electric vehicle servicing such as fork-lift trucks; lift maintenance; UPS commissioning, servicing and maintenance; electro-plating plants and welding equipment servicing
Product Overview:
- DC and AC current and voltage
- 600 A and 600 V
- Resistance and continuity
- 31/2 digit, 4000 count display with backlight
- High resolution digital bargraph
- Peak, min/max and data-hold functions
- Zero-offset REL mode for comparative measurements
- Supplied complete with test leads and carry case
- IEC61010 CAT III 600 V
Get Best QuoteRequest A Callback
Megger AVO410 Digital Multimeter
Product Price: Rs 12,500 / UnitGet Best Price
Product Brochure
Product Details:
| Model Name/Number | AVO410 |
| Brand | Megger |
| Warranty | 1 Year |
| Digit Display | 4 Digit |
| Safety Rating | IEC61010 CAT IV 600 V |
| Display Type | 6000 counts backlit digital display |
| Weight | 522 g |
| Data Hold | Yes |
| Battery Life | Alkaline 300 hours |
| Operating Ambient | Non-condensing |
| Overload Protection | 600 V rms |
| Polarity | Automatic |
| Max. Test Current | 1.5mA |
| Storage Temperature Range | -20 Degree Celsius to 60 Degree Celsius |
| Max. Open Circuit Voltage | 3V |
Details:
- The Megger AVO410 digital multimeter has been designed for the contracting electrician and has the additional features that also make the instrument suitable for wide range of applications and users. The instrument offers AC and DC voltage and current measurements as well as resistance, frequency and capacitance ranges. True RMS readings on the AC functions are standard on the AVO410 and the instrument features a CATIV 600 V safety rating meaning the instrument is suitable for industrial applications. The slim, compact case has a tough rubberised holster that provides that extra degree of protection from the extreme conditions found in industrial environments. The style of the case and positioning of the function switch and buttons means the unit sits comfortably in the palm for single handed use. Continuous references to the user guide have been avoided by the AVO410 utilising simplified functions. The display features a back light that allows measurements to be made in poorly lit areas. The AVO410 test leads are supplied with silicon cable and have GS38 compliant shrouded tips on the prods. Auto-ranging When first selected, all functions are auto-ranging. A range button on the AVO410 allows multiple manual range selection on each function; a feature that is generally welcomed by many users. Minimum / Maximum measurements The instrument has a MIN MAX function that allows the user to switch between minimum and maximum measurements. The display does not have to be continually monitored to capture a momentary increase or fall in readings. Data hold This function allows a displayed result to be frozen on the display which avoids having to remember a measurement value. The hold function can be nested within the MIN MAX feature which stops the AVO410 continuously updating the minimum and maximum measurement values. Voltage measurements Both AC and DC voltage measurements up to 750 V and 1000 V respectively are possible with the AVO410, the AC reading being a true RMS value. Current measurements For current measurements up to 10 A, a separate fused terminal is provided to protect both user and instrument from excess current. Continuity / diode testing The continuity function features a buzzer and provides the user both optical and audio indication of identifying and confirming continuity between two points. This function also allows forward and reverse bias testing of diode and semiconductor junctions. RS232 The RS232 feature has been disabled. Resistance, capacitance and frequency Resistance can measured directly on the ohms range from 0 to 60 MΩ with capacitance measurements from 0 to 6.000 mF. In addition, frequency measurements from 0 to 60 MHz are possible.
AC conversion type:
- Conversion type and additional specification are the same as DC/ AC voltage. NOTE: The DCμA input terminal is protecte by 3.6 kΩ PTC (600 V rated) thermistors. The loading efect of these devices may cause measurment errors on low impedance circuits (<100 kΩ). Note: When measuring current on the A current terminal the instrument has an internal impedance of 0.01 Ω at AC/DC A in series with circuit under test. The loading effect may cause measurement errors on low impedance circuits. For example: Measuring a 1 Ω impedance circuit will cause a -1 % measuring error.
Product Overview:
- 6000 count backlit digital display
- True RMS reading on a.c. mode
- 1000 V d.c. / 750 V a.c. ranges
- 10 A a.c. / d.c. ranges
- Resistance, frequency and capacitance ranges
- CAT IV 600 V safety rating
Get Best QuoteRequest A Callback
Megger DCM 1500S
Product Price: Rs 49,000 / PieceGet Best Price
Minimum Order Quantity: 1 Piece
Product Brochure
Product Details:
| Model Name/Number | DCM1500S |
| Usage/Application | Industrial |
| Brand | MEGGER |
| Display | YES |
| Measuring Frequency | YES |
Leads), as well as 1500A AC or DC, the DCM1500S is ideal for
use in the installation, maintenance, monitoring and testing
of photovoltaic systems as well standard AC or DC electrical
equipment.
The meter is supplied with both standard 4mm leads as well as
the new PVHV1 (4 mm) and PVHV2 (MC4PV) HV lead sets. It
has a large clear backlit display and an automatic torch in the
jaw to assist use in poorly lit areas.
Using the free Megger Link App, the measurement value can
be remotely monitored on a smart device using the built-in
Bluetooth®. This will give a live trend graph and offer the
ability to sample and log the values for later analysis.
Additional Information:
- Production Capacity: As per OEM
- Delivery Time: 1 Weeks
- Packaging Details: BOX
Get Best QuoteRequest A Callback
Megger 5kv Insulation Tester Bm 5500
Product Price: Rs 75,000 / PieceGet Best Price
Product Brochure
Product Details:
| Material | Mild Steel |
| Type Of Testing Machines | Powder Dynamometer |
| Color | Black |
| Packaging Type | Box |
| Usage/Application | Industrial |
| Model Name/Number | BM 5500 |
| Test Voltage | 5 KVA |
| Range | 5 KVA |
Get Best QuoteRequest A Callback
Megger VF 6
Product Price: Rs 8,500 / PieceGet Best Price
Product Brochure
Product Details:
| Model Name/Number | VF6 |
| Usage/Application | Industrial |
| Brand | MEGGER |
| Display | NO |
Get Best QuoteRequest A Callback